Commissioning; Checking The Rotation Direction - SOMFY Sonesse 40 PA Mode D'emploi

3 Commissioning

3.1 Checking the rotation direction

Switch on the power supply.
1) Press the control point UP button:
a) If the shade is raised (a), the rotation direction
is correct: move to the section entitled «Adjusting
the end limits».
b) If the shade is lowered (b), the rotation direction
is incorrect: move to the next step.
2) Switch off the power supply.
Reverse the two live wires on the control point.
3) Switch on the power supply.
Press the control point UP button
to check the rotation direction.
6 Copyright © 2011-2017 SOMFY ACTIVITES SA. All rights reserved
1
a
=
b
=
2
3