Cleaning And Maintenance - Unold 58746 Notice D'utilisation

Masquer les pouces Voir aussi pour 58746:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
fat and wait until the required
temperature is reached again.
Then continue frying until the
foodstuff is ready.
ATTENTION:
Take care of oil splashes!
7.
Frozen food contains more water
than dry food and causes more
splashes!
8.
Do not leave the fried food too
long in the drainage position over
the deep fryer. Escaping steam
may weaken the crust.
9.
Do
not
leave
unattended after use, always
unplug after use.
10. Overheat protection/safety shut
off

CLEANING AND MAINTENANCE

Unplug before cleaning.
Let the appliance cool off
completely. Do not touch the
heating element, as this is still
hot for a long time after use.
1.
Take off the control element by
pulling it carefully upwards.
2.
The heating and control element
must not be plunged into water
or any other liquid or come into
contact with water.
3.
Take out the oil pan with both
hands. If you want to use the oil
again pass it through a very fine
sieve. You may store the fat in the
enamelled oil pan with closed lid
in the refrigerator. For reuse, solid
oil can be heated on the stove
until it's just liquid before placing
the heating element.
28
the
appliance
The
appliance
with an overheat protection. If
the appliance is switched on
inadvertently or without oil in the
oil pan and the heating element
is not sufficiently covered with
fat, the appliance is switched
off
automatically
overheating.
11. In this case first switch off and
unplug the appliance. Let the
deep fryer cool off. Remove the
heating element and push the
small RESTART button in the
cable storage.
CAUTION:
The appliance becomes very
hot during operation!
4.
Replace used frying oil regularly.
Dispose the used oil according to
your local regulations.
5.
Do not use any sharp or abrasive
cleaning agents for cleaning of
the enamelled oil pan, as this
may scratch the surface. All parts
except the heating and control
element can be cleaned in warm
soapy water or in the dishwasher.
In case of encrustations, soak the
respective parts in warm soapy
water.
6.
Wipe the control element with a
dry cloth.
7.
Dry all parts carefully.
8.
Clean the appliance regularly for
a longer lifetime of the deep fryer.
9.
Reassemble the appliance as
described in the chapter „First
use".
is
equipped
to
avoid

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Edelstahl

Table des Matières