h
Acknowledge with
Use the
and
keys to set the value within the specified range.
The longer the key is pressed, the faster the value will change.
h
Acknowledge the setting with
value.
The subsequent parameter is set according to the same navigation principle.
v
see overview of operation on the first inside page.
4.5 Canceling editing
+
will cancel editing, the original value is retained.
4.6 Acknowledging alarms
Requirement: AL.q = on
h
Press the
key briefly (for less than 3 sec)
4.7 Immediate start/stop of defrosting
Press the
key for more than 3sec
2009-04-10
, the value blinks
, the new value is stored, and the display again switches between parameter name and
, prompting your entry.
4 Commissioning the instrument
11