2009-04-10
7.1 Setup program
This program and the interface with adapter can be supplied as
accessories. They offer the user the following advantages:
-
easy and convenient parameterization and archiving from a PC
-
simple duplication of parameters for instruments of the same type
-
entry of a linearization table
-
reading out data sets from the data logger.
The data are saved together with the setup file.
7.2 Hardware and software requirements
-
PC Pentium III or above
-
128 MB RAM, 16 MB free space on hard disk
-
CD-ROM drive
-
free USB interface, mouse
1
-
Microsoft
Windows 2000/XP
h
Connect USB cable of interface to the PC
h
Connect PC interface with USB/TTL converter to the instrument via
the adapter (4-pole socket)
7.3 Displaying the device software version
h
Press the
and
This version is also recognized by the setup program and shown under
⇒
Info
Info through Setup.
1. Microsoft is a registered trademark of Microsoft Corporation
keys simultaneously, holding them down.
7 Technical data
38