Operator Level - JUMO eTRON M 100 Notice De Mise En Service

2009-04-10
6

Operator level

This level covers all parameters that are accessible (not locked by a code) to the operating personnel, for instance.
Ex-factory, no parameters are available at this level.
In the picture below, the parameters SP and HYS are configured at the operator level.
Any parameter (up to eight 8) can be enabled at this level through the setup program.
h
Press briefly
Operator level
(no parameters
enabled in factory setting)
Display
alternates
As well as SP and HYS,
another 6 parameters can be
enabled through setup program
P
6 Operator level
34