Commissioning The Instrument; Displays And Controls - JUMO eTRON M 100 Notice De Mise En Service

4

Commissioning the instrument

4.1 Displays and controls

LC display 3-character nine-segment display, 13 mm high, and symbols for the
temperature unit, hr, min, and sec, with red background lighting. Once
the supply is switched on, all the segments light up and stay on for 5
seconds.
LED Cooling
LED Defrosting
The LED comes on when the corresponding relay is energized.
LED Fan
The LED goes out when the corresponding relay is de-energized.
LED Alarm
Keys
Setup A PC interface and an adapter (4-pole socket) are used to connect the
instrument to a PC.
interface
The RS485 interface must not be used during this time !
2009-04-10
For Start/Stop of manual defrosting, press for >3 sec
for acknowledgement of alarms, press for <3 sec
Programming
Increase value/ subsequent parameter
Decrease value/ previous parameter
4 Commissioning the instrument
9