Servicing, Operating Hours Counter - JUMO eTRON M 100 Notice De Mise En Service

Parameter Meaning

5.11 Servicing, operating hours counter

Time between services (timer Service interval)
The time period after which the cooling unit is due for servicing (e.g. oil change or
coolant test) is set here.
The sum of all the active cooling-unit runtimes is saved here (i.e. the times in which
the relay
As soon as the current service counter
output.
v
Chapter 8 "Alarm and error messages"
Operating time counter of cooling relay (time active relay hours)
The sum of all active cooling unit runtimes is saved here (i.e. the times in which the
relay was energized).
This time can be used as a measure of how reliable or error-prone a cooling unit is
within the system (in spite of regular servicing).
H
No error messages are output.
After 999 days (approx. 2.7 years) of cooling-unit runtime, the count starts
again with 0.
This counter can be reset manually.
2009-04-10
was energized).
has completed this time, an alarm is
5 Parameter level
Value range
from...factory-set...to
0 ... 999 days
0 ... 999 days
over 24 hrs, days are
displayed:
below 24 hrs, hours
are displayed and the
small h appears:
31