Table des Matières
Publicité
Electric wire rope winch >BETA II<
English
6.4. Operating material / Recommended lubricant
Synthetic oils must not be mixed with mineral oils.
Size M0, lifetime lubricated with high quality synthetic lubricant
(an oil change is usually not necessary)
Size 1 - Size 2 - Size 1.5 - Size 3 – Size 3,5 - Size 4 - Size 5
lubricant
DIN 51502
identified after
DEA
FUCHS
Klüber
Mobil
Tribol
For perfect function of the wire rope winch we recommend to use a lubricant as per the upper table.
These special oils fulfil best the technical requirements with regard to viscosity (walk penetration) and pour
point.
The lubricants are based on ambient temperatures of - 20° up to + 40°C.
In case of extreme temperatures please contact us or the "Technical Services" of the listed mineral oil
companies.
The oil filling may change according to mounting positions (see page 26),
Every other reputed brand of lubricant corresponding to the applicable specification of the table may be
used.
Waste lubricant has to be disposed according to legal regulations!
design changes under reserve
mineral oil
Oil CLP ISOVG 220
Degol BG 220
Energol GR-XP 220
Falcon CLP 220
Spartan EP 220
Renep Compound 106
Küberoil GEM 1-220
Mobil-gear 630
OMALA OIL 220
TRIBOL 1100 ISO 220
04.01.401
e.g. -Tribol 800- CLP-PG-ISO 460
Examples for lubrications
bearing grease
Aralub HL 3
Energrease LS 3
Multifak 20
Beacon 3
Renolit FEP - 3
Staburags NBU8EP
Mobilux3
ALVANIAR 3
MOLLUB ALLOY BRB 527
page 36
Publicité
Table des Matières
