Publicité
Les langues disponibles
Les langues disponibles
Order No.
Assembly instructions
1106
Happy Hunter
Checking the working systems, trimming
Checking the working systems
Check once more that the motors run in the correct direc-
tions (contra-rotating propellers), and test the steering
system carefully. Check each of the installed auxiliary wor-
king systems in turn.
Assemble the model completely, ready to run, and place it
in the bath (preferably half-full of water). Add lead ballast
until the boat floats evenly at the marked waterline. Check
all round the hull: the model must not list (lean to one side).
Use lead sheet or lead shot as trim ballast. When you are
confident that all is well, fix the lead ballast inside the hull so
that it cannot possibly shift.
Charge up the batteries, and your new model is ready for its
maiden run.
robbe Modellsport GmbH & Co. KG
We reserve the right to alter technical specifications.
48
Publicité
