Selecting A Region (Eu Version); Inactive Alarm; Extra Settings; Serial Number - Spektrum DX18 Manuel D'utilisation

Selecting a Region (EU Version)

In the Systems Settings screen, rotate the roller to highlight
Region then press the roller to select the Region function. Two
regions are available for EU radios only—EU328 (compliant for
European countries) and FR328 compliant for France. US radios
are fixed to US-247 USA compliant.

Inactive Alarm

The time delay for when the inactivity alarm begins can be
adjusted from Inhibit to 5, 10, 30, or 60 minutes.

Extra Settings

System sound can turn off sounds. Vibrator can be turned off.
Trim display on the main screen has three options INH, Boxed
Boxes and Boxed Arrows.

Serial Number

This screen shows the serial number you can use to register
your DX18 at community.spektrumrc.com and the AirWare
version installed in your DX18.

Calibrate

Calibrate is used to calibrate the gimbals as well as the sliders
and knob. To calibrate the gimbals move the sticks in + signs
moving from left to right, and up and down. Light movement of
the sticks to each endpoint will give the best results, pushing the
stick too hard at each endpoint can cause an error in calibration.
After moving both gimbals in + signs, return both gimbals to the
SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
Rotate the roller to select the desired Region based on where
the radio will be used. With Region selected, press the roller to
accept that region.
Export the serial number to your SD card as a text file, if desired
for easy registration. Check the Spektrum community website
for any AirWare updates. Once you have registered your radio
you will be updated when a new version of AirWare is available
for download.
center in both directions. Then move both sliders all the way
up and down, and then return the slider to center. Then move
the right knob all the way in both directions, and then return the
knob to center. Then select SAVE to store the calibration.
EN
19