Assembly Of Pump Kit - Medela Symphony Mode D'emploi

9. Assembly of Pump Kit

T Tip
Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
Parts Needed:
• Tubing
• Symphony ® pump
• Breast shields
• Breast milk bottles
• Lids
• Connectors
• Yellow Valve Heads
• White Membranes
• Membrane cap
• Protective membrane
Note
• Use Authentic Medela Spare Parts
only. See Section 2 for details.
• Check pump kit components for
wear or damage before use and
replace if necessary.
• All components must be completely
dry before use for proper
performance and to prevent damage
to the pump.
22
1
Caution
Wash hands thoroughly with soap and water
before touching breast pump, kit and breasts and
avoid touching the inside of containers or lids.
4
Push the yellow valve head head and white
membrane onto the connector.
 Position valve head laterally.
7
Place the protective membrane
onto a flat surface and carefully
push the membrane cap down
until it engages.