2
Press the "Let-down" button
within 10 seconds. The display text
will change to "INITIATE running".
It is important to complete the entire
15 minute INITIATE program.
2
If your milk starts to flow before the
end of the two minutes, press "Let-
down button
to change to the
expression phase
Make sure that the milk flows
into the bottle properly.
Set to Maximum Comfort Vacuum
in both stimulation and expression
phases. Refer to Section 12.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
Program complete
The INITIATE program runs
automatically for 15 minutes with
stimulation, expression and pauses
phases. An auditory signal indicates
the end of the program. The display
shows "Program complete". The
pump will automatically turn off.
TM
35