Putting Together Your Breast Pump Kit - Medela Pump In Style Mode D'emploi

5. Putting together your breast pump kit

Parts needed:
• Breast pump
16
• Tubing
• Breast shields
To prevent damage to the breast pump all components must be completely dry before use.
7. Insert one of the short ends of the tubing into the opening of the connector lid.
8. Insert the long end of the tubing into the breast pump as far as it will go.
• Breast milk bottles and lids
• Connector bodies
• Connector caps
NOTICE
1. Wash hands thoroughly.
2. Carefully insert the (dark yellow) membrane with the flap into
the opening of the connector.
Æ Make sure that the membrane forms a seal around the edge
of the connector.
3. Close the lid of the connector until you hear a click.
4. Screw the connector onto the bottle.
5. Carefully push the breast shield into the connector body.
Æ Choose a breast shield size that suits your needs.
For proper sizing see MedelaBreastShields.com (U.S.) or
Medela.ca/BreastShields (Canada).
6. The oval breast shields can be rotated (360°) and placed in
the desired position to have the most comfortable fit for you.
• M
embranes
Can lead to material damage.