Medela Symphony Mode D'emploi page 24

9. Assembly of Pump Kit (cont.)
9
Open the lid of the breast pump.
 Press the oval button on the
top of the Symphony and lift the
handle.
11
Center the tubing connector in the recess in
the pump housing.
 Make sure that the membrane cap
engages and lies flush to the surface.
24
10
Position the membrane cap firmly
on the breast pump membrane
to form a seal. Center the tubing
connector in the recess in the pump
housing.
 Make sure that the membrane
cap engages and lies flush to the
surface.
Note
If single pumping seat only one
membrane cap.
12
Close the lid.
Note
For step 12:
•
Always close the lid when pumping.
The lid keeps the membrane cap
pushed down to prevent a loss
of vacuum that could occur if the
membrane cap came off.