Assembly; Assembly Of Pump Kit - Medela Pump In Style Advanced Mode D'emploi

2. Assembly

Parts you will need for this step:
• Breastshield
• Membrane
• Breastmilk bottles
and lids
• Metro motor
Note
• Inspect valves for cracks or chips and
inspect membranes for holes, tears or
warping. If you notice any damage to
these parts, replace them immediately.
16
87071 or 8107264
• Breastshield
connector
• Valve
• Tubing
• 9 volt power
adaptor

2.1 Assembly of pump kit

1
Wash hands before touching
breastpump, kit and breasts
and avoid touching the inside of
containers or lids.
4
Snap membranes onto valves
until membranes lie completely
fl at on valve.