Assembly; Assembly Of Pump Kit - Medela Swing Mode D'emploi

2. Assembly

Parts you will need for this step:
• Motor unit
• Breastshield
• White membrane
• Breastmilk bottle
and lid
Note
• Inspect valves for cracks or chips
and inspect membranes for holes,
tears or warping. If you notice any
damage to these parts, replace them
immediately.
Info
• Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
14
• Tube
• Connector
• Yellow valve

2.1 Assembly of pump kit

1
Wash hands before touching
breastpump, kit and breasts
and avoid touching the inside of
containers or lids.
4
Screw bottle onto connector.
Caution
• Wash hands throughly with
soap and water before touching
the breast and pump parts.