Sleep Timer - Aiwa XR-M919 Mode D'emploi

To check the specified time and source
Press JOG MODE again and display the timer mode you have
selected, then press ENTER/ILLUMINATION (ENTER/ILLUMI).
The selected source name, the timer-on time and the duration
En
for the timer-activated period are displayed. Press JOG MODE
repeatedly to return to the previous display.
To change the timer setting
Set the timer again from the beginning.
To cancel timer standby mode temporarily
Press JOG MODE to display the timer mode, then turn
VOLUME/MULTI JOG to display "TIMER OFF". And then
press ENTER/ILLUMINATION within 6 seconds.
44

Sleep timer

The system can be turned off automatically at a specified time.
1 Press JOG MODE repeatedly so that "SLEEP
OFF" is displayed.
Alternatively, hold down SHIFT and press SLEEP on the
remote control.
2 Within 6 seconds, turn VOLUME/MULTI JOG,
press TUNING UP/DOWN or f/g on the
remote control to set the sleep timer duration.
The sleep timer duration can be set between 5 and 320
minutes in 5-minutes steps.
To check the remaining time until the system turns
off
Press JOG MODE repeatedly so that "SLEEP XX" (XX is
the time until the power is turned off) is displayed. The
remaining time is displayed for 6 seconds.
To cancel the sleep timer
Press JOG MODE repeatedly so that "SLEEP XX" is
displayed. Then turn VOLUME/MULTI JOG or press TUNING
UP/DOWN (or f/g on the remote control) to display
"SLEEP OFF".