Aiwa XR-M919 Mode D'emploi page 29

8 Turn VOLUME/MULTI JOG to select an index mark
mode.
To register index marks automatically at the beginning of
each track, select "Mark:AUTO ?".
To register index marks every 5 minutes, select
"Mark:TIME ?".
To record without registering index marks automatically,
select "Mark: OFF ?".
9 Press ENTER/ILLUMINATION (ENTER/ILLUMI).
10 Press GROUP DIRECT (or GROUP (DIRECT) on
the remote control).
"1Grp ADD?" is displayed.
11 Turn VOLUME/MULTI JOG to select the group to
which new recordings are to be added.
12 Press MD EDIT/REC.
13 Press a to start recording.
Programmed recording of a CD onto
an MD
1 Insert a recordable MD.
2 Turn FUNCTION to select the CD function and
insert a CD.
3 Program the desired tracks.
Follow steps 1 to 3 on page 13.
4 To record at normal speed, press CDl MD
NORMAL.
To record at double speed, press CDlMD HIGH.
5 Press a to start recording.
Note
When double speed recording is attempted while the same
track is programmed twice or more, recording cannot be made
and "Can't REC" will be displayed.
Copy-protect features
SCMS
When digital recording is attempted from recorded material
with copyrights, digital dubbing cannot be performed to a
recordable MD from another MD recorded in digital because
of the built-in record restriction function which complies with
the SCMS* standard.
* SCMS (Serial Copy Management System) is the standard
to restrict single digital dubbing between digital audio
systems thus protecting copyrights.
Mini Disc
(prerecorded sound source)
Recording through
CD*
analogue inputs
* Recording from a digitally recorded CD-R/RW to an MD is
not possible.
Double speed recording
To protect copyrighted material against abusive digital copying,
this system prohibits continuous double speed recordings of
any given CD. Once a double speed recording is started, the
same CD cannot be recorded at double speed again for the
next 74 minutes.
This applies even if the recording has been stopped in the
middle.
En
Digital dubbing
29