Radio Operations; Preset Tuning - Aiwa XR-M919 Mode D'emploi

RADIO OPERATIONS

En
TUNING
DOWN/UP
DEMO/RDS
Manual tuning
1 Press BAND (TUNER/BAND on the remote
control) repeatedly to select a band.
The system switches to the radio from any other function
and alternates between FM, MW and LW.
2 Press TUNING UP or DOWN (f or g on
the remote control) repeatedly to tune in a station.
"TUNE" is displayed when a station is tuned in.
1 is displayed for FM stereo reception.
To search for a station automatically (Auto search)
Hold down TUNING UP or DOWN (f or g).
The unit searches for a station and stops at reception.
To stop the search manually, press TUNING UP or DOWN
(f or g).
•Auto search may not stop at stations with weak signals.
14
PRESET
BAND
SET TUNER
MONO
CLEAR
SHIFT
f,g
c
a
s

Preset tuning

Preset your favourite stations by either of the following ways
("Manual presetting" or "Automatic presetting") and tune them
in directly by using the preset number.
Manual presetting
1 Tune in the desired station.
2 Press SET to store the station.
The preset number, beginning from "1" flashes on the
display.
3 Repeat steps 1 and 2 to preset other stations.
•The system can store a total of 32 preset stations.
•If power is interrupted for more than approximately 12 hours,
all settings stored in memory after purchase need to be reset.
Automatic presetting
Scans the receivable frequency range and stores tuned stations
automatically with the preset number.
1 Press BAND (TUNER/BAND).
2 Hold down DEMO/RDS for 4 seconds until
TUNER/BAND
"AUTO PRESET" runs through the display.
0-10,+10
3 Within 4 seconds press SET.
The tuning indicator is displayed and scanning begins
with the FM band.
The frequency and the preset number (beginning from 1)
will be displayed when a tuned station is stored.
The display will return to the first stored station when
scanning is finished.
•The system scans the MW and LW bands if preset numbers
are still available.
•Automatic presetting clears all the previously stored preset
stations.
•If identical RDS stations with alternative frequencies are
detected, only the station with the stronger signal is stored.