Aiwa XR-M919 Mode D'emploi page 27

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Analogue recording
Recording through analogue inputs from the tuner, cassette
tape*, CD, or external equipment connected to the AUX IN
jacks or AUX DIGITAL IN jack can be made easily.
Also you can select monaural recording.
* Available only when the FX-LM918 optional Stereo Cassette
Deck is connected.
1 Insert a recordable MD.
2 Turn FUNCTION to select the source to be
recorded.
3 Prepare the source to be recorded.
To record a radio broadcast, tune in a desired station.
To record from a CD, insert the disc.
To record from a tape, insert the tape.
To record from connected equipment, prepare the
equipment for playback.
4 Press MD MODE (or hold down SHIFT and press
MD MODE on the remote control).
"Auto GROUP?" is displayed.
5 Within 8 seconds, press ENTER/ILLUMINATION
(or ENTER/ILLUMI on the remote control).
6 Turn VOLUME/MULTI JOG to turn the auto
grouping mode on or off.
"Auto GRP ON": turns on the auto grouping mode.
Contents from the beginning to the end of the recording
session will make a group.
"Auto GRPoFF": turns off the auto grouping mode.
No group will be created.
7 Press ENTER/ILLUMINATION (ENTER/ILLUMI).
8 Press MD MODE twice (or hold down SHIFT and
press MD MODE twice on the remote control).
"Mark MODE ?" is displayed.
9 Within 8 seconds, press ENTER/ILLUMINATION
(ENTER/ILLUMI).
10 Turn VOLUME/MULTI JOG to select an index mark
mode.
To register index marks automatically at the beginning of
each track, select "Mark:AUTO ?".
To register index marks every 5 minutes, select
"Mark:TIME ?".
To record without registering index marks automatically,
select "Mark: OFF ?".
11 Press ENTER/ILLUMINATION (ENTER/ILLUMI).
12 Press REC MODE (or MD REC (ANALOG) on the
remote control) repeatedly to select the recording
mode.
"RecSTEREO": standard length stereo recording mode
"Rec LP2": two times longer stereo recording
"Rec LP4": four times longer stereo recording
"Rec MONO": monaural recording
13 Press MD EDIT/REC.
Alternatively, within 4 seconds, press w on the remote
control.
The selected recording mode and "MD REC" are
displayed.
14 Press a to start recording.
When recording from connected equipment, start playback
of the connected equipment.
To stop recording
Press s.
To add index marks during recording
Press ENTER/ILLUMINATION (ENTER/ILLUMI).
Tips:
•Using the monaural recording mode, you can record twice
as long as the time printed on the MD.
•When recording from a CD to an MD is made using analogue
recording, CD digital signals are once converted to analogue
signals, and the converted signals are recorded on an MD
in digital form.
En
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xr-m919mdtXr-m919mdXr-m919t

Table des Matières