Device Status - Assignment Of The Leds; Status Led Yellow - Burkert 8691 Manuel D'utilisation

11.13.3. d evice status - assignment of the leds
The device status of the control head (transparent cap) is displayed optically by colored high-power LEDs (Top
LEDs). The assignment of the green and yellow Top LEDs to the end position can be changed via Explicit Mes-
sages (attribute address: class 150, instance 1, attribute 9).
The following functions are shown as standard
color
green Top LEDs on
yellow Top LEDs off
red LED flashing
alternately with the green or
yellow Top LEDs
Table 26: Assignment of Top LEDs, DeviceNet
Figure 40: Top LEDs and status LED, DeviceNet
noTe!
damage or malfunction due to penetration of dirt and humidity!
To ensure protection class IP65 / IP67:
• Screw the transparent cap in all the way.
11.13.4. s tatus led yellow
led yellow
flashing Teach function is running
Puck PCB or puck holder not available
flickers
→ Insert puck PCB or puck holder
Table 27: Status LED yellow, DeviceNet
noTe!
damage or malfunction due to penetration of dirt and humidity!
To ensure protection class IP65 / IP67:
• Screw the transparent cap in all the way.
54
device status
End position bottom
End position top
• online, without connection to the Master
• Connection time-out
• Critical error
english
Type 8691
DeviceNet
Top LEDs
Status LED
(yellow)