Burkert 8691 Manuel D'utilisation page 34

IN 1
IN 2
+
24 V
-
+
Valve
-
Figure 23: Assignment of the Top LEDs
→
Check that the seal is correctly positioned in the body casing.
noTe!
damage or malfunction due to penetration of dirt and humidity!
To ensure protection class IP65 / IP67:
• Screw the body casing in all the way.
→
Close the device (assembly tool: 674077
Figure 24: Position of the seal in the body casing
The assembly tool (674077) is available from your Bürkert sales office.
6)
34
Jumper for assignment of Top LEDs
ye gn
Jumper function:
You can set the color assignment of the end positions with
the jumpers.
You can indicate for each color whether it applies to the Top
(upper end position) or Bot (lower end position).
).
6)
english
ye gn
Body casing
Seal
Body casing
Type 8691
Electrical installation 24 V DC