Configure The Device For Dhcp / Bootp Or Static Ip - SICK DL100 Pro Notice D'instructions

2.1.3. Configure the device for DHCP / BootP or static IP

•
Go to the TCP/IP tab
•
Click "Get_Attribute_ALL"
•
Apply changes to ....
•
Changes become effective after reboot (Power Cycle or via Reset Service)
© SICK AG • Subject to change without notice • 8019720/ZVZ7/2018-03-22
Operating instructions Distance measuring device DL100 – EtherNet/IP
Switch between static
and dynamic
assignment
Static IP configuration
IP
79