Examples; Molex Ethernet/Ip Tool; Tool Configuration - SICK DL100 Pro Notice D'instructions

2.

Examples

2.1. Molex EtherNet/IP Tool

The Molex EtherNet/IP Tool can be downloaded free of charge from:
http://www.deutsch.molex.com/molex/common/staticLoader.jsp?fileName=/mx_upload/superfamily/i
ccc/EtherNet_IPTool.html
Note: Under Windows 7 you must run the program as administrator.

2.1.1. Tool configuration

Click on "Options" and select the Ethernet Adapter that is connected to a DL100. The default network
configuration of the device is:
IP: 192.168.100.236
Subnet: 255.255.255.0
You can always reset the device to factory defaults using the display.
1. Go to menu "SpecFu"
2. Apply reset
© SICK AG • Subject to change without notice • 8019720/ZVZ7/2018-03-22
Operating instructions Distance measuring device DL100 – EtherNet/IP
77