For Your Safety; Authorised Personnel; Appropriate Use; Warning About Incorrect Use - SICK LFV200 Manuel De Mise En Service

2 Product description

1

For your safety

1.1

Authorised personnel

All operations described in this operating
instructions manual must be carried out only by
trained specialist personnel authorised by the
plant operator.
During work on and with the device the required
personal protective equipment must always be
worn.
1.2

Appropriate use

The LFV200 is a sensor for point level detection.
You can find detailed information about the area
of application in chapter "Product description".
1.3

Warning about incorrect use

Inappropriate or incorrect use of the instrument
can give rise to application-specific hazards,
e.g. vessel overfill or damage to system compo-
nents through incorrect mounting or adjustment.
Thus damage to property, to persons or environ-
mental contamination can be caused. Also the
protective characteristics of the instrument can
be influenced.
1.4

General safety instructions

This is a state-of-the-art instrument complying
with all prevailing regulations and directives. The
instrument must only be operated in a techni-
cally flawless and reliable condition. The opera-
tor is responsible for the trouble-free operation
of the instrument. When measuring aggressive
or corrosive media that can cause a dangerous
situation if the instrument malfunctions, the
operator has to implement suitable measures to
make sure the instrument is functioning properly.
During the entire duration of use, the user is
obliged to determine the compliance of the
necessary occupational safety measures with
the current valid rules and regulations and also
take note of new regulations.
The safety instructions in this operating instruc-
tions manual, the national installation standards
as well as the valid safety regulations and
accident prevention rules must be observed by
the user.
For safety and warranty reasons, any invasive
work on the device beyond that described in the
12
operating instructions manual may be carried
out only by personnel authorised by the manu-
facturer. Arbitrary conversions or modifications
are explicitly forbidden. For safety reasons, only
the accessory specified by the manufacturer
must be used.
To avoid any danger, the safety approval mar-
kings and safety tips on the device must also be
observed and their meaning looked up in this
operating instructions manual.
1.5

EU conformity

The protection goals of the EMC Directive
2014/30/EU (EMC) and the Low Voltage Directi-
ve 2014/35/EU (LVD) are fulfilled.
Conformity has been judged according to the
following standards:
EMC: EN 61326-1
(electrical instruments for control technology
and laboratory use - EMC requirements)
•
Emission: Class B
•
Susceptibility: Industrial areas
LVD: EN 61010-1
(safety regulations for electrical measurement,
control and laboratory instruments - part 1:
General requirements)
2 Product description
2.1

Configuration

Scope of delivery
The scope of delivery encompasses:
•
LFV200 point level switch
•
Test magnet
•
Documentation
– This operating instructions manual
Further information
You can find all available documentation of the
sensor on the product page in the Internet under
www.sick.com
There the following information is available as a
download:
•
Type-specific online data sheets of the
instruction versions with technical data,
dimensional drawing and diagrams
LFV200 • IO-Link