ITW Food Equipment Group VULCAN V24 Mode D'installation Et Mode D'emploi page 16

STANDARD OVEN
Light open top/griddle pilots before lighting oven pilot.
1. Open kick panel and lift up the pilot lighting hole cover (Fig. 18).
2. Light pilot by depressing the reset button located behind the kick panel (Fig. 19). Continue to hold
reset button in for 1 minute. If pilot fails to light, turn main gas supply OFF and wait 5 minutes before
repeating Step 2.
3. After pilot is lit, turn the thermostat to the desired setting.
Nightly Shutdown
Turn oven thermostat OFF.
Complete Shutdown
1. Turn oven thermostat OFF.
2. Turn main gas supply OFF.
RACK ARRANGEMENT - STANDARD OVEN
The standard oven has four rack positions and is supplied with one oven rack. Additional racks may be
obtained through a Vulcan-Hart parts depot.
For best results when baking cakes and pastries, it is recommended that only a single rack position be
utilized. However, proper rack usage and positioning is really determined by the individual cooking
needs of the operator. If you are cooking a large roast, the entire oven cavity may be utilized. Remove
the oven rack completely from the range and place the roasting pan directly on the oven bottom.
i F . g 1 8
— 16 —
i F . g 1 9