ITW Food Equipment Group VULCAN V24 Mode D'installation Et Mode D'emploi page 13

LIGHTING AND SHUTTING DOWN PILOTS
All adjustment procedures associated with pilot lighting must be performed
installation or service person.
HOT TOP AND GRIDDLE TOP BURNERS
1. Turn main gas supply ON.
2. Wait 30 seconds and, using a taper, light the hot top or griddle top pilot (Fig. 16).
S h o w n i w h t o
3. If pilot fails to light, turn main gas supply OFF. Wait 5 minutes and repeat the above procedures.
4. Turn one hot top or griddle top burner valve ON to remove air from the gas line. Turn burner valve
OFF when gas begins to flow.
Nightly Shutdown
Turn burner valve OFF; pilot will remain lit.
Complete Shutdown
1. Turn burner valve OFF; pilot will remain lit.
2. Turn main gas supply OFF.
d l s y t e l b u n r r e k n o s b N e w s y t
Fig. 16
— 13 —
by an authorized Vulcan-Hart
e l b u n r r e k n o s b f e e f t c v i e 1 9 / 8