Hitecsa ADVANCE EQP1X Mode D'emploi page 145

Electrical data
Absorbed power in AUTOMATIC 1
Absorbed power in AUTOMATIC 2
Absorbed power in AUTOMATIC 3 / SELECT 2/ SELECT 1
Pump absorbed power
Electrical power supply
Auxiliary power supply
Nominal current (▲) (■)
Maximum current (■)
Starting current
Pump absorbed current
Dimensions
Width (L)
Height (H)
Depth (P)
Water connections
Recovery system water filling connection
(*) In the following conditions: condenser input air temperature 35°C;
chilled water temperature 7°C; main heat exchanger (evaporator)
temperature differential 5°C.
(**) In the following conditions: chilled water temperature 7°C;
temperature differential at main exchanger (evaporator) 5°C, secondary
exchanger (recovery) hot water outlet temperature 40/45°C at nominal
flow.
(***) In the following conditions: coil inlet air temperature 7°C D.B., 85%
R.H.; main exchanger (condenser/evaporator) or secondary exchanger
(recovery) hot water outlet temperature 40/45°C at nominal flow.
(▲) The current value shown is the maximum from among the values
measured in AUTOMATIC and SELECT
conditions.
(●) Power absorbed by the unit without motor-driven pump.
(■) Total current value, including the current absorbed by the pump.
N.B.:
The calculation of the E.E.R. and C.O.P. does not take the pump
absorption into account.
IOM_EQP1X_117a133_208094_200901_ES-EN-FR-DE-IT
mode (*) (●)
mode (**) (●)
mode (***) (●)
mode in the respective nominal
kW
kW
kW
kW
V-ph-Hz
V-ph-Hz
A
A
A
A
mm
mm
mm
Ø
Ø
147
ENCLOSED DOCUMENTS
117 124 130
6,45 9,38 11,70
4,95 7,37 9,79
6,08 8,95 11,11
0,57 0,57 0,70
400-3+N-50
230-1-50
15,0
21,3 24,2
17,0 22,7 27,0
105 123 134
2,7
2,7 5,1
1522 1522 1822
1090 1280 1510
580 600 695
1 ½" 1 ½" 1 ½"
1 ½" 1 ½" 1 ½"