I.7 Instructions For Use; Important; I.7.1 Unit Power Supply; Isolation From The Electricity Network - Hitecsa ADVANCE EQP1X Mode D'emploi

I.7 INSTRUCTIONS FOR USE
By means of the switches and the keypad the user may carry out the
following operations:
 power the unit;
 start-up;
 change/select the operating mode;
 set summer, winter and recovery set points;
 view alarms via the display;
 stop the unit;
 disconnect the unit from the mains power supply.

IMPORTANT!

Any other operation must be carried out by
qualified personnel authorised by
I.7.1 UNIT POWER SUPPLY
In order to power the unit, turn the
mains switch in a clockwise direction
after having armed the automatic switch
that protects the compressor.
Switch on the control panel and the main screen will appear.
!
ALARM
Inlet Water
Outlet Water
Prg
OFF BY KEYB.
SELECT
ON
OFF
Press the DOWN key to display the unit status.
!
ALARM
Prg
ON
OFF
IOM_EQP1X_117a133_208094_200901_ES-EN-FR-DE-IT
HITECSA
I ON
0.00 C
0.00 C
MODE
Comp1: UNIT OFF
MODE
I.7.2 ISOLATION FROM THE ELECTRICITY
NETWORK
In order to electrically isolate the unit,
turn the mains switch in an anticlockwise
direction.
!
ALARM
Prg
ON
OFF
The mains switch can be locked in order
to prevent anyone accidentally powering
the unit.
IMPORTANT!
If the mains switch is opened, it cuts off the
electricity supply to the storage tank plate
exchanger heater and the storage tank antifreeze
heater (RAA accessory). The switch should only be
disconnected for cleaning, maintenance or repair of
the machine.
40
SECTION I: USER
!
ALARM
00h00'
Work time C1
00h00'
Work time C2
Prg
Fan1: UNIT OFF
Fan2: --
ON
OFF
!
ALARM
GSM Modem
Status:
Prg
Stand-by ext. modem
ON
OFF
I ON
The control panel
MODE
switches off.
I ON
MODE
MODE