Fuel Tank; Battery; Purging The Softener Pump (Option) - Dibo JMB-M Mode D'emploi

E N
S E R V I C E
10

Fuel tank

Check for damage or leakages. If damaged, you have to replace/repair the tank.
Regularly check the tank on contamination.
11

Battery

Check the battery on good connections / possible wear and whether the battery
needs to be recharged. If the idling battery voltage drops below: 12.6 V (or if
stored / not used during 6 months), this must be recharged. This can happen by
means of a trickle charger, standard charger or workhouse charger. Reloading
need to be done by a qualified technician.
Caution: Ventilate sufficiently when reloading battery,
avoid risk of sparks (no smoking), care for a good
electrical connection of the charger & the battery!
12

Purging the softener pump (option)

The softener hose pump does not need to be purged.
Regularly clean the vent cap, remove product residues!
DiBO 36