15. Loading accumulator data
• In the main menu, select the function "LOAD DATA" with the button "Batt Type/Stop".
PROGRAM SELECT
PROGRAM SELECT
PROGRAM SELECT
PROGRAM SELECT
PROGRAM SELECT
• Press the button "Start/Enter"; the display shows the following, for example, and memory
"01" blinks:
LOAD [01]
LOAD [01]
LOAD [01]
LOAD [01]
LOAD [01]
3.7V
3.7V
3.7V
3.7V
3.7V
• With the buttons "INC" or "DEC", select the desired memory (1....5).
• Keep the button "Start/Enter" depressed for approx. 3 seconds. The display briefly shows
"LOAD...".
The data is applied and all settings are performed in accordance with the saved values.
80
LOAD DATA
LOAD DATA
LOAD DATA
LOAD DATA
LOAD DATA
LiPo
LiPo
LiPo
LiPo
LiPo
2000mAh
2000mAh
2000mAh
2000mAh
2000mAh