Saving/Loading Rechargeable Battery Data; Selecting/Setting Rechargeable Battery Data - VOLTCRAFT V-CHARGE 100 DUO Notice D'emploi

14. Saving/Loading Rechargeable Battery Data

The charger has a total of 10 memories in which you can save rechargeable battery
data/settings. They can be loaded again on demand.
a) Selecting/Setting Rechargeable Battery Data
• Select the function "BATT MEMORY" in the main menu
of the charger with the button "INC" or "DEC".
• Confirm the selection by pressing the "START/ENTER"
button. The memory number flashes.
• Select one of the 10 memories with the buttons "INC" or
"DEC".
If there already are data in the memory, the display will alternate, e.g., between the
rechargeable battery type and the cell number, as well as the charging and discharg-
ing current.
When the memory is empty, only "ENTER SET ->" is displayed.
• Confirm the selection of the memory number by press-
ing the "START/ENTER" button.
The rechargeable battery type is displayed first; see
figure on the right.
• The buttons "INC" and "DEC" select the desired setting function (e.g. battery type, cell num-
ber, charge current, etc.). A description of the respective setting functions shown is included
on the following pages.
If a setting is to be changed, briefly push the button "START/ENTER". The respectively adjust-
able value flashes.
• Change the flashing value with the buttons "INC" and "DEC". Keep the respective button
pressed for quick adjustment.
• Complete the setting by briefly pushing the "START/ENTER" button. The respective adjust-
able value stops flashing. Then you can select another setting function, see above.
If you want to save all previous settings in the
memory selected at first, call the setting func-
tion "SAVE PROGRAM" at the end with the
buttons "INC" and "DEC" and briefly push the
button "START/ENTER".
If this is not done, all settings are lost!
100
PROGRAM SELECT
BATT MEMORY
[ BATT MEMORY 1]
ENTER SET->
BATT TYPE
LiPo
SAVE PROGRAM
ENTER