Saving Accumulator Data - VOLTCRAFT B6 Notice D'emploi

14. Saving accumulator data

The charger has altogether 5 memory slots in which you can save accumulator data/settings.
• In the main menu, select the function "SAVE DATA" with the button "Batt Type/Stop".
PROGRAM SELECT PROGRAM SELECT
PROGRAM SELECT PROGRAM SELECT PROGRAM SELECT
• Press the button "Start/Enter"; the display shows the following, for example, and memory
"01" blinks:
SAVE [01] SAVE [01] SAVE [01]
SAVE [01] SAVE [01]
3.7V 3.7V
3.7V 3.7V 3.7V
• Select the desired memory slot with the buttons "INC" or "DEC" (1....5) and confirm your entry
with the button "Start/Enter".
• Now the accumulator type, which you can change with the buttons "INC" or "DEC" blinks on
the top right of the display. Confirm the selection by pressing the "Start/Enter" button.

It is not possible to select between "LiPo", "LiIon" and "LiFe". The type set in
the user menu is always applied.
• The voltage starts to blink on the bottom left. Change this as usual using the buttons "INC"
and "DEC", confirm the value using the "Start/Enter" button.
• Now the accumulator capacity blinks on the bottom right. Set this with the buttons "INC" or
"DEC" (keep button depressed for fast changing) and confirm this with the button "Start/
Enter".
• Then the memory slot number blinks again.
• Keep the button "Start/Enter" depressed for approx. 3 seconds to access the next menu,
then let the button go again immediately. The following display appears (depending on the
previously selected accumulator type):
NiMH CHARGE NiMH CHARGE NiMH CHARGE
NiMH CHARGE NiMH CHARGE
CUR LIMIT CUR LIMIT
CUR LIMIT CUR LIMIT CUR LIMIT

If you keep the button "Start/Enter" pressed too long, the display shows "SAVE"
and the settings are saved. Then restart the setting.
78
SAVE DATA SAVE DATA SAVE DATA
SAVE DATA SAVE DATA
LiPo LiPo LiPo
LiPo LiPo
2000mAh 2000mAh
2000mAh 2000mAh 2000mAh
At* At* At*
At* At*
4.0A 4.0A
4.0A 4.0A 4.0A
LiPo CHARGE LiPo CHARGE
LiPo CHARGE LiPo CHARGE LiPo CHARGE
1.0A 1.0A 1.0A
1.0A 1.0A
* *
* * *
7.4V(2S) 7.4V(2S) 7.4V(2S)
7.4V(2S) 7.4V(2S)