Loading Battery Data - VOLTCRAFT B6 Duo Notice D'emploi

15. LOADING BATTERY DATA

Please observe that each charging channel has its own 10 memory slots, which are
independent from each other.
Example: You are storing the data of a LiPo batters in charging channel 1, memory
slot "01". If you switch to charging channel 2, you can use its memory slot "01" for
something completely different, e.g. to store the data of a NiMH battery (unless you
programme the same data into the memory slots "01" for both channels.
• In the main menu, select the function "LOAD DATA" with the button "TYPE/STOP":
PROGRAM SELECT PROGRAM SELECT
PROGRAM SELECT PROGRAM SELECT PROGRAM SELECT
• Press the button "ENTER/START"; the display shows the following, for example, and
memory "01" flashes:
LOAD [01] LOAD [01]
LOAD [01] LOAD [01] LOAD [01]
3.7V 3.7V 3.7V
3.7V 3.7V
• Select the desired memory slot (1....10) with the "+" or "-" buttons.
• Keep the button "ENTER/START" depressed for approx. 3 seconds. The display briefly
shows "LOAD . . .".
The data is applied and all settings are performed in accordance with the saved values.
The desired charging or discharging programme is now available with the data loaded.
LOAD DATA LOAD DATA LOAD DATA
LOAD DATA LOAD DATA
LiPo LiPo
LiPo LiPo LiPo
2000mAh 2000mAh 2000mAh
2000mAh 2000mAh
89