Technical Data - VOLTCRAFT B6 Notice D'emploi

22. Technical data

Operating voltage: ........................ 11 - 18V=, stabilised
Current consumption: ................... Depends on charge current and accumulator
Charging Current: ......................... 0.1A - 5.0A adjustable
Discharging Current: ..................... 0.1A - 1.0A adjustable
Accumulator types: ....................... NiCd, 1 - 15 cells
Output: ........................................... 4mm sockets
Discharge current for balancer: ... 300mA per cell
Weight: .......................................... approx. 264g
Dimensions: .................................. approx. 134 x 87 x 33mm
Ambient temperature: ................... 0°C to +35°C
Ambient air humidity: .................... Max. 90% relative, non-condensing
Special features:
• Integrated balancer for LiPo batteries with 2, 3, 4, 5 or 6 cells
• Delta-U cutoff
• Input voltage monitoring (for protection against total discharge)
• Capacity limit configurable (prevents the connected accumulator from overload)
• Charge duration configurable (prevents the connected accumulator from overload)
• Max. output of the electronics for charge current 50W (select lower charge current depending
on the number of cells!)
• Max. output of the electronics for discharge current 5W (select lower discharge current
depending on the number of cells!)
(5A adapter recommended)
NiMH, 1 - 15 cells
LiPo/LiIon/LiFe, 1 - 6 cells
Pb, 1 - 10 cells (2V per cell, 2 - 20V
Balancer sockets (JST-XH) for 2 to 6 cells
93