Loading Accumulator Data; Information During Charging/Discharging - VOLTCRAFT VC-1506 Notice D'emploi

15. loadIng aCCuMulator data

• In the main menu, select the function „LOAD DATA" with the button „Batt Type/Stop".
• Press the button „Start/Enter"; the display shows the following, for example, and memory „01" blinks:
• With the buttons „+>" or „
• Keep the button „Start/Enter" depressed for approx. 3 seconds. The display briefly shows „LOAD...".
The data is applied and all settings are performed in accordance with the saved values.

16. InforMatIon durIng ChargIng/dIsChargIng

Various basic settings can be called up on the display during charging/discharging. You can scroll through these
displays with the „ " key.
-
<
If you have connected a multiple-cell lithium battery to the balancer, you can also monitor the charging state of the
individual cells at any time with the „+>" key.
-
<
94
", select the desired memory (1....5).
-
<
When the procedure finishes, the battery has reached the end-
point voltage.