SICK RE 4000 Notice D'instructions page 78

Chapter 5
78
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Technical specifications
5.4 List of tables
Tab. 1: Technical data RE 4000 ........................................................74
Tab. 2: Technical data, sensor and actuating element....................76
5.5 List of illustrations
Fig. 1: Typical response range and possible approach
directions ................................................................................63
Fig. 2: Minimum distance between sensor and actuating
element ...................................................................................63
Fig. 3: Mounting sensor and actuating element; the
actuating element is not allowed to be mounted
above the sensor if screws without self-locking are
used.........................................................................................63
Fig. 4: Minimum distance to neighbouring sensors........................64
Fig. 5: Block diagram for RE 4000 — wiring example with
2 sensors ................................................................................68
Fig. 6: Sensor selector switch — Setting example on wiring
with 3 sensors (1 + 5 + 6) .....................................................68
Fig. 7: Example wiring for 24 V AC/DC with 3 sensors, with
external device monitoring and static RESET
(connection for sensor channel 5 and 6, cf. Fig. 5) .............69
Fig. 8: Dimensional drawing, evaluation unit ..................................77
Fig. 9: Dimensional drawing, sensor ................................................77
Fig. 10: Dimensional drawing, actuating element.............................77
Operating Instructions
RE 4000
8 010 416/08-10-03