Masimo SafetyNet Alert Manuel De L'utilisateur page 23

• Setup the Masimo Sensor and pair to the Bedside Station.
• Add your Emergency Contacts.
Bedside Station Setup
Follow the instructions below to set up the Masimo SafetyNet Alert system. The Bedside Station is
set up in two (2) steps.
Step 1: Pair the Masimo SafetyNet Alert App to the Bedside Station using Bluetooth.
Step 2: Connect the Bedside Station to the wireless network (Wi-Fi).
WARNING: Place the Bedside Station in a safe location so as not to fall on anyone and where the
alarm sounds can be heard.
1. Following the on-screen instructions, connect the Bedside Station to a power outlet
using the AC power cord and adapter and select Continue.
Note: The Bedside Station Status LED is white when powered on.
2. Hold your smart phone near the Bedside Station during setup. When complete, the
App screen will display: Success.
Note: If the Bluetooth connection fails, hold the smart phone closer to the Bedside
Station and try to reconnect. If the Bedside Station cannot connect, see
Troubleshooting
Next, connect to your Wi-Fi by selecting Set Up Wi-Fi and follow the app instructions.
3.
4. Select the wireless Network and enter the Password. Select Continue.
Note: To view available Wi-Fi networks within range of the Bedside Station, click the
Network field and select from the displayed list
on page 41.
21