Masimo SafetyNet Alert Manuel De L'utilisateur page 46

Displayed Messages
"Bedside Station not found"
"Bedside Station
Disconnected from Server"
"Bedside Station Error"
"Unable to connect to Wi-Fi"
"No Internet Connection"
"Enable phone Bluetooth"
"The username entered
already exists, please try
another"
"Battery low Warning"
"Depleted Battery"
"Wireless Sensor
Disconnected"
Potential Causes
Timeout has occurred
during setup when
searching for Bedside
Station.
Bedside Station is
disconnected from the
cloud server.
Bedside Station internal
hardware fault.
Wi-Fi connection failure due
to timeout or invalid
password.
• The smart phone is
not connected to a
Wi-Fi network.
• The smart phone is
not connected to a
cellular network.
Smart phone Bluetooth is
turned off.
User name already exist
with another user.
Sensor battery is low.
Sensor battery is depleted.
Sensor is not monitoring.
44
Next Steps
Follow the troubleshooting section of this
manual to resolve the issue.
Follow the troubleshooting section of this
manual to resolve the issue.
The Bedside Station requires replacement,
please contact Masimo Customer Support. See
Customer Support
on page 69.
Enter the correct password.
Ensure the smart phone is connected to a Wi-Fi
or cellular network.
Turn on the smart phone Bluetooth.
Please choose another user name.
Replace sensor.
Replace sensor.
Ensure sensor placement steps are completed
and you are obtaining readings.