Functional Parts Layout - SICE S 560 Manuel D'instruction

Do not leave working place if the wheel is
Mind to the tool-holding arm during tilting
or opering.
Code 4-402637
WARNING:
Unreadable and missing warning labels must be replaced immediately.
Do not use the tyre changer if one or more labels are missing.
Do not add any object that could prevent the operator from seeing the labels.
Use the code in this table to order labels you need.
1 - Lifting bracket
2 - Self-centering chuck holding arm
3 - Self-centering chuck
4 - Sliding table
5 - Main switch
8 - Upper joystick
9 - Turntable opening/closing switch
10 - Chuck anticlockwise rotation pedal
11 - 2nd-speed switch
12 - 2nd-speed pedals
S 560
still mounted on the turntable.

8. FUNCTIONAL PARTS LAYOUT

Code 4-402635
Crushing hazard during tool holding arm re-hoking.
Code 4-402926
13 - Carriage
14 - Tool holding arm
15 - Lower joystick
17 - Bead breaking disk
18 - Tool
19 - Tools replacement knob
20 - Chuck clockwise rotation pedal
21 - Manometer
22 - Jaw
38
ENGLISH • Instructions manual
Crushing hazard between turntable
and tool.
Wheel-faling hazard