Introduction - SICE S 78 TOUCH Manuel D'instructions

INTRODUCTION

The purpose of this manual is to provide the owner
and operator with effective and safe instructions for
the use and maintenance of the equipment.
Follow all the instructions carefully and your machine
will assist you in your work and give lasting and
efficient service.
The following paragraphs define the levels of danger
regarding the machine, associated with the warning
captions found in this manual.
DANGER
Refers to immediate danger with the risk of seri-
ous injury or death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor
injuries or damage to property.
Read these instructions carefully before starting
the machine. Keep this manual and all illustrative
material supplied with the machine in a folder near
it where it is readily accessible for consultation by
the operators.
The technical documentation supplied is considered
an integral part of the machine; in the event of
sale all relative documentation must remain with
the machine.
The manual is only valid for the machine model and
serial number indicated on the nameplate applied
to the machine itself.
WARNING
Comply with the contents of this manual: any uses
of the machine that are not specifically described
are under the full responsibility of the operator.
42
Note
Some of the illustrations contained in this booklet
have been taken from pictures of prototypes:
standard production machines may differ slightly
in certain respects.
These instructions are for the attention of person-
nel with basic mechanical skills. We have therefore
condensed the descriptions of each operation
by omitting detailed instructions regarding, for
example, how to loosen or tighten the fixing de-
vices. Do not attempt to perform operations unless
properly qualified or with suitable experience. If
necessary, please contact an authorised Service
Centre for assistance.
S78 Touch - Operator's manual