Transport, Storage And Handling - SICE S 78 TOUCH Manuel D'instructions

TRANSPORT,
STORAGE AND HANDLING
The basic wheel balancer packaging consists of 1
wooden crate containing:
- Wheel balancer.
- Monitor (in packaging).
- Wheel guard.
- Equipment.
Before installation, the wheel balancer must be
shipped in its original packaging, making sure that
the machine is maintained in the position indicated
on the outer packaging. The machine can be moved
by placing the packaging on a wheeled trolley or
inserting the forks of a fork lift truck in the relative
slots in the pallet (Fig. 1).
- Packaging dimensions:
Length (mm/in): .................................. 1786/70
Depth (mm/in): ................................... 1148/45
Height (mm/in):.. ............................... 1250/49
Weight (kg/lb):.. ................................. 226/497
Packaging weight (kg/lb): .........................43/95
Weight of electrical/electronic
components (kg/lb):. ...............................10/22
- The machine must be stored in an environment
meeting the following requirements:
• relative humidity ranging from 20% to 95%;
• temperature ranging from -10° to +60°C.
CAUTION
Do not stack more than two packs to avoid dam-
aging them.
S78 Touch - Operator's manual
The machine may be moved for installation or for
subsequent relocation as follows:
- With a crane, using special equipment that holds
the machine at the designated lifting points (Fig.
2).
- By inserting the forks of a lift truck under the
machine so that the centre of the forks correspond
approximately to the centre line of the body (Fig.
3).
1
Always unplug the power supply cable from the
socket before moving the machine.
WARNING
2
3
43