8. TIPS ANd RECOMMENdATIONS
The motor doesn't work:
Verify:
• The wiring of the motor.
• Batteries are not depleted.
• The compatibility of the control.
• The heat generated (wait for the cooling of the motor).
• If using battery tube, make sure the batteries are installed with the correct polarity.
The equipment stops too soon:
Verify:
• The operation of end-limits during the motor rotation.
• The end-limits of the motor are properly adjusted.
• That the shade is within the recommended weight limit.
If the motor stops operating normally, the battery voltage may be too low. Replace
batteries.
9. TEChNICAL dATA
Power supply
Radio frequency
Torque
Up speed
Down speed
Electrical insulation
Minimum distance between two end-limit
Maximum distance between two end-limit
Maximum running time
Operating temperature
Protection rating
Maximum number of associated control
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
12 Vdc SELV
433,42 MHz
1.1 Nm
30 rpm
80 rpm
III
1 turn
180 turns
6 min
0°C to + 60°C
IP 20 (For indoor use only)
12
13