Table Des Matières; Introduction - SOMFY Roll Up 28 RTS Notice D'installation

CONTENTS
1. Introduction
2. Safety
2.1. Safety and responsibility
2.2. Specific safety advice
3. Installation
3.1. Motor preparation
3.2. Tube preparation
3.3. Motor/tube assembly
3.4. Mounting the motorized tube
on the brackets
4. Wiring
5. Commissioning
5.1. Programming the RTS transmitter 6
5.2. Checking the rotation direction
5.3. Adjusting the end limits
5.4. Recording the RTS transmitter
5.5. Favorite position: MY position /
Recording MY position.
6. Operation
6.1. Mode selection: Roller or Tilting
mode

1. INTROdUCTION

The Roll Up 28 RTS is a motor specially dedicated to interior applications.
The Roll Up 28 RTS can motorize roller blinds, silhouette blinds and roman shades.
The Roll Up 28 RTS is a battery operated motor, powered with lithium primary batteries
or NiMH batteries with solar pack. The motor can also be powered by a power supply.
Warning : The Roll Up 28 RTS is compatible only with the «Sunis Indoor WireFree
RTS» sensor.
Warning : The Roll Up 28 RTS cannot be used with sealed double glazing.
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
3
6.2. Up, Down, My: In roller mode
6.3. Up, Down, My: In tilting mode
4
4
7. Additional setting
4
7.1. Favorite position: MY position
7.2. End limit re-adjustement
5
7.3. Adjusting the tilting speed
5
7.4. Modifying the motor rotation
5
direction
5
7.5. Modifying the wheel rotation
direction
6
7.6. Adding/Deleting RTS transmitter 12
6
7.7. Erasing the transmitters from the
memory
6
7.8. Erasing the memory of the motor 12
7
8. Troubleshooting
7
9. Technical data
8
8
8
8
9
9
10
10
10
11
11
11
12
13
13
TM
3