Mounting The Motorized Tube On The Brackets; Wiring; Commissioning; Programming The Rts Transmitter - SOMFY Roll Up 28 RTS Notice D'installation

3.4. Mounting the motorized tube on the brackets

a) Standard bracket
b) Motor plate for specific bracket
For optimal radio reception,
the motor antenna should be
kept straight and should be
positioned outside of headrail
(if used).

4. WIRING

Plug the battery with the motor supply
cable.
Warning: Do not unplug the
battery when the motor works.

5. COMMISSIONING

5.1. Programming the RTS transmitter

Press the UP and DOWN buttons
simultaneously on the RTS transmitter:
the shade jogs and the control point is
preprogrammed in the motor
6
a
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
b