Adding/Deleting Rts Transmitter; Erasing The Transmitters From The Memory; Erasing The Memory Of The Motor - SOMFY Roll Up 28 RTS Notice D'installation

7.6. Adding/deleting RTS transmitter

Find an RTS transmitter (A) programmed in
the motor.
Press and hold the RTS programmed
transmitter (A) PROG button or the motor
PROG button until the shade jogs: the
motor is in programming mode.
Quickly press the RTS transmitter(B)
PROG button to add or delete: the shade
jogs and the RTS transmitter
is programmed or deleted from the motor.

7.7. Erasing the transmitters from the memory

To delete all the programmed transmitters,
press and hold the motor PROG button
until the shade jogs twice.
All the transmitters are deleted.

7.8. Erasing the memory of the motor

To reset the motor, press and hold the
PROG button on the motor head until the
shade jogs 3 times.
All the settings are erased.
12 Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
PROG. PROG.
A B
x2
x2
x3
x3