Using The Navigation Button - Burkert 8228 Mode D'emploi

Warning
danger due to non-conforming commissioning.
Non-conforming commissioning could lead to injuries and damage
the device and its surroundings.
▶ Before commissioning the device, calibrate the zero point of
conductivity. See chap. 9.7.
▶ Before commissioning the device, set the wiring mode for all the
outputs. See chap. 9.6.
▶ Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
▶ In particular, observe the safety recommendations and intended
use.
▶ The device / the installation must only be commissioned by suit-
ably trained staff.
▶ Set the correction factor of the fitting used. See chap. 9.8.
22
English
Type 8228
Operatingandcommissioning
9.2

using the navigation button

Symbolised by in
this manual
Symbolised by in
this manual
Fig. 18: Using the navigation button
Symbolised by in this
manual
Symbolised by
in this manual
Symbolised by
in this manual