Intendeduse
2
inTenDeD use
use of the device that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
the 8228 conductivity meter is intended solely for the meas-
urement of the conductivity.
▶ This device must be used in compliance with the characteristics
and commissioning and use conditions specified in the contrac-
tual documents and in the user manual.
▶ This device must be protected against electromagnetic interfer-
ence, ultraviolet rays and, when installed outdoors, the effects of
climatic conditions.
▶ Only use a device in perfect operating condition.
▶ Correctly store, transport, install and use the device.
▶ Only use the device as intended.
▶ Observe any existing restraints when the device is exported.
Type 8228
3
bAsic sAfeTy informATion
This safety information does not take into account:
• any contingencies or occurences that may arise during installation,
use and maintenance.
• the local safety regulations for which the operating company is respon-
sible including the staff in charge of installation and maintenance.
risk of injury due to high pressure in the installation.
▶ Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to electrical voltage.
▶ Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
▶ All equipment connected to the 8619 shall be double insula-
ted with respect to the mains according to the standard IEC
61010-1:2010.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
risk of injury due to high fluid temperatures.
▶ Use safety gloves to handle the device.
▶ Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
▶ Respect the regulations on accident prevention and safety relat-
ing to the use of aggressive fluids.
English
5