Data Of The Connectors And Wires - Burkert 8228 Mode D'emploi

Masquer les pouces Voir aussi pour 8228:

Manuel d'utilisation (72 pages)

Mode d'emploi (34 pages)

Manuel d'utilisation (72 pages)

Table des Matières

Les langues disponibles

Technicaldata

Power source (not

• limited power source according to

supplied)

paragraph 9.3 of EN 61010-1 standard

• or class 2 source according to

UL 1310/1585 and EN 60950-1

standards

Current consumption

• without the

• max. 1 W (max. 25 mA at 12 V DC;

consumption of

starting current ~100 mA)

the current outputs

and the transistor

outputs

• with the

• max. 40 W (max. 1 A for the transistor

consumption of

outputs)

the current outputs

and the transistor

outputs

Transistor output

polarized

• type

• NPN (/sink) or PNP(/source) (through

wiring and through parameterizing)

• NPN output

• 1-36 V DC, 700 mA max. (or 500 mA

max. if 2 transistor outputs are wired)

• PNP output

• supply voltage, 700 mA max. (or 500

mA max. if 2 transistor outputs are

wired)

• protection

• galvanically insulated, protected against

overvoltages, polarity reversals and

short-circuits

Type 8228

Current output

• specification

• 4-20 mA, sink or source (through wiring

and through parametrizing), 22 mA to

indicate a fault (can be parametered)

• type of connection

• 3-wire

• max. loop

• 1100 W at 36 V DC, 610 W at 24 V DC,

impedance

100 W at 12 V DC

• Response time (10

• 150 ms (default value)

% - 90 %)

6.6