Installation - Stiebel Eltron ETW 120 Manuel D'utilisation Et Installation

INsTAllATION

AssEmBlY
10.3 Installation
»
Prior to fixing the appliance, ensure the minimum permissible
clearances to adjacent objects are maintained.
Minimum clearances
»
Prior to beginning installation, undo the two wall retainers from
the appliance back panel.
»
Remove the air inlet grille from the catch springs by pulling
forwards at the bottom, and release it from the upper locking
device by lifting slightly.
»
Undo the screws in the air outlet grille and remove it.
Removing the air outlet and inlet grilles
1
2x
2
1 Air outlet grille
2 Air inlet grille
32 |ETW 120, 180, 240, 300, 360, 420, 480 electronic
»
Undo the screws in the front panel and the inner front panel
behind it, both at the bottom edge.
Removing the front panel
3x
Removing the inner front panel
2x
a.
www.stiebel-eltron.com